济南广告字品质优劣取决于后期处理工艺

页面更新时间:2015-06-08 14:19 来源:未知 作者:admin 点击:

济南广告字窍门之一:雕刻设置尽可能选择三维雕刻(有人称:二维半雕刻)方案,选90度的锥形刀进行雕刻,这样在视觉上弱化了纤维板材雕刻面上的粗糙感。

Advertising words in Jinan one trick: sculpture set as much as possible three-dimensional carving (say: two and a half dimensional sculpture) scheme, choose 90 degree cone knife carving, so in the visual weakens the fiber plate engraving on the surface of the rough feeling.

济南广告字 http://www.xiongdiguanggao.com/ 窍门之二:雕刻设置时,不要出现分层雕刻,一次性设至最佳深度,可通过更换刀具来实现。这是因为分层雕刻后会出现叠痕,影响雕刻部位做漆的光滑度。

Ji'nan advertising word tricks two: engraving settings, do not appear layered engraving, one-time set to the best depth, can be achieved by replacing the cutter. This is because after the lamination will appear stacked marks, the impact of the sculpture site to do paint smoothness.

济南广告字窍门之三:由于雕刻前工件表面贴有即时贴,因此填色时可放心操作。直接选用毛笔手工填色,省漆、省工,效果并不差。

Trick three: Ji'nan advertising words due to carving workpiece surface with a post, so when the coloring can be assured operation. Direct choose brush manual colouring, paint saving, labor saving, the effect is not bad.

济南广告字窍门之四:选用自喷漆填色时,应先将色漆喷于纸杯中静置15分钟后再用毛笔蘸色填涂。否则自喷漆中的腐蚀性很强的稀释剂会损伤工件的漆表面。

Jinan advertising word tips: choose from painting when colouring, should be first paint spraying in disposable cups standing for 15 minutes and then brush dips in Tiantu color. Otherwise, the paint surface of the paint can damage the workpiece with a strong corrosive diluent..